BMW 3 Series E30

since 1983-1994 release

Repair and operation of the car

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
- 11. Running gear
   11.1.10. Back springs
   11.1.11. Bar of the back stabilizer of cross stability
   11.1.12. Levers of a back suspension bracket
   11.1.13. Bearings of back wheels
   11.1.14. Angles of installation of wheels
   11.1.2. Specifications
   11.1.3. Stabilizer of cross stability of a forward suspension bracket
   11.1.4. Suspension bracket lever
   11.1.5. Rack of a forward suspension bracket
   11.1.6. Springs or shock-absorber of a rack of a suspension bracket
   11.1.7. Spherical support
   11.1.8. Nave of a forward wheel and bearing
   11.1.9. Back shock-absorbers
   - 11.2. Steering
      11.2.2. Tips of helmsmen ятг
      11.2.3. Covers of the steering mechanism
      11.2.4. Steering mechanism
      11.2.5. Pump of the hydraulic booster
      11.2.6. Removal of air from the power steering
      11.2.7. Steering wheel
+ 12. Body
+ 13. Electric equipment
+ 14. Useful tips


11.2.7. Steering wheel



On the car with a safety cushion independently it is forbidden to perform this procedure.

Removal and installation

1. Disconnect the battery from weight.
2. Hook and remove a company brand in the center of a wheel.
3. Turn off a nut and designate a tag the provision of a wheel on a shaft.
4. Transfer the ignition key to the 1st situation to unlock the wheel shaft lock.
5. Remove a wheel, if necessary use a stripper, it is forbidden to remove a wheel blows of the Hummer.
6. Installation is carried out upside-down. At assembly combine tags on a wheel and to a shaft and tighten a nut with the set moment.