BMW 3 Series E30

since 1983-1994 release

Repair and operation of the car

BMW E30
+ 1. Maintenance instruction
- 2. Maintenance
   2.2. The recommended lubricants and liquids
   2.3. Frequency of service
   2.4. Features of routine maintenance of the car
   2.5. General information on additional maintenance
   2.6. Check of level of liquids
   2.7. Check of a condition of tires and pressure in tires
   2.8. Replacement of oil in the engine and an oil filter
   2.9. Check and restoration of level of liquid in a wheel
   2.10. Check of level of liquid in automatic transmission
   2.11. Shift of wheels
   2.12. Check and replacement of hoses in a motor compartment
   2.13. Check, adjustment and replacement of belts of the drive of hinged units
   2.14. Check and adjustment of turns and quality of mix (SO) of idling
   2.15. Check of a state and battery charging
   2.16. Check and replacement of candles
   2.17. Check of high-voltage wires, runner and cover of the distributor
   2.18. Check of level of oil in the manual transmission
   2.19. Check of level of oil in the main transfer
   2.20. Check and adjustment of gaps in valves (except the M40 engine)
   2.21. Draft of a butterfly valve
   2.22. Replacement of the air filter
   2.23. Check of fuel system
   2.24. Check of the cooling system
   2.25. Check of the exhaust system
   2.26. Check of shock-absorbers, suspension bracket and steering
   2.27. Check of covers of half shafts
   2.28. Check of brakes
   2.29. Check of brushes of screen wipers
   2.30. Replacement of liquid in automatic transmission and the filter
   2.31. The cooling system – replacement of liquid and washing
   2.32. Replacement of the fuel filter
   2.33. Replacement of oil in the manual transmission
   2.34. Replacement of oil in a case of the main transfer
   2.35. Check of system of catching of vapors of gasoline (EVAP system)
   2.36. Installation of the light alarm system of need of servicing
   2.37. Replacement of a gear belt
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Useful tips

2.30. Replacement of liquid in automatic transmission and the filter

GENERAL INFORMATION

Works are performed on completely cooled down engine.

PERFORMANCE ORDER

1. Lift the car and establish on supports.
	2. Substitute the pallet, turn off a cap nut of a branch pipe of the index of level.
	3. Merge liquid.
	4. Turn off transmission pallet bolts, remove all arms.
	5. Remove the pallet, having destroyed consolidation and merge the liquid remains.
	6. Turn off fastening bolts.
	7. Remove the filter from transmission.
	8. Check a condition of this sealing ring, if necessary replace.
9. If necessary replace a sealing ring, install the new filter, having tightened bolts.
10. Install the pallet, having gradually tightened bolts till the set moment. Establish a transmission branch pipe.
11. Lower the car and fill in liquid in the necessary quantity.
12. Start the engine on bystry single to the course, selector of transmission has to be in situation Park.
13. Transfer the selector to all provisions, again establish in situation Park. Check liquid level.
14. At the first trips you watch the level of liquid and check existence of dribbles from a transmission case.